#!/bin/bash
setupFilesTomcat() {
setupFilesTomcat_serverXml
setupFilesTomcat_remoteCidrValve
setupFilesTomcat_remoteIpValve
setupFilesTomcat_rewriteValve
setupFilesTomcat_authnValve
setupFilesTomcat_turnOnAjp
setupFilesTomcat_turnOnHttp
setupFilesTomcat_turnOnHttps
setupFilesTomcat_authn
setupFilesTomcat_context
setupFilesTomcat_ports
setupFilesTomcat_accessLogs
setupFilesTomcat_sessionTimeout
setupFilesTomcat_ssl
setupFilesTomcat_sslCertsAnchors
setupFilesTomcat_sslCertsClient
}
setupFilesTomcat_authnValve() {
if [ "$GROUPER_SETUP_AUTHN_VALVE" = "true" ] ; then
if [ -f /opt/tomcat/lib/someOtherValve.jar ] ; then
if [ $(grep -c 'SomeOtherValve' /opt/tomcat/conf/server.xml) -eq 0 ]; then
sed -i 's|</Host>|<Valve className="SomeOtherValve" /></Host>|g' /opt/tomcat/conf/server.xml
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_authnValve) Apply valve: sed -i 's|</Host>|<Valve className="SomeOtherValve" /></Host>|g' /opt/tomcat/conf/server.xml, result: $returnCode"
if [ $returnCode != 0 ]; then exit $returnCode; fi
else
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_authnValve) Not setting up authn valve SomeOtherValve is in /opt/tomcat/conf/server.xml"
fi
else
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_authnValve) Not setting up authn valve since this file does not exist: /opt/tomcat/lib/someOtherValve.jar"
fi
else
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_authnValve) Not setting up authn valve since GROUPER_SETUP_AUTHN_VALVE is not true"
fi
}
setupFilesTomcat_rewriteValve() {
if [ "$GROUPER_REDIRECT_FROM_SLASH_TO_GROUPER" = "true" ] ; then
if [ "$GROUPER_UI" = "true" ]; then
if [ ! -f /opt/tomcat/conf/Catalina/localhost/rewrite.config ] ; then
mv /opt/tomcat/conf/Catalina/localhost/rewrite.config.grouper /opt/tomcat/conf/Catalina/localhost/rewrite.config
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_rewriteValve) mv /opt/tomcat/conf/Catalina/localhost/rewrite.config.grouper /opt/tomcat/conf/Catalina/localhost/rewrite.config, result: $returnCode"
if [ $returnCode != 0 ]; then exit $returnCode; fi
sed -i "s|__CONTEXT__|$GROUPER_TOMCAT_CONTEXT|g" /opt/tomcat/conf/Catalina/localhost/rewrite.config
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_rewriteValve) sed -i \"s|__CONTEXT__|$GROUPER_TOMCAT_CONTEXT|g\" /opt/tomcat/conf/Catalina/localhost/rewrite.config, result: $returnCode"
if [ $returnCode != 0 ]; then exit $returnCode; fi
fi
sed -i 's|<!--GROUPER_TOMCAT_REWRITE_VALVE-->|<Valve className="org.apache.catalina.valves.rewrite.RewriteValve" />|g' /opt/tomcat/conf/server.xml
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_rewriteValve) Apply remote IP valve: sed -i 's|<!--GROUPER_TOMCAT_REWRITE_VALVE-->|<Valve className=\"org.apache.catalina.valves.rewrite.RewriteValve\" />|g' /opt/tomcat/conf/server.xml, result: $returnCode"
if [ $returnCode != 0 ]; then exit $returnCode; fi
fi
fi
}
setupFilesTomcat_remoteIpValve() {
if [ "$GROUPER_TOMCAT_REMOTE_IP_VALVE" = "true" ]; then
if [ $(grep -c '<!--GROUPER_TOMCAT_REMOTE_IP_VALVE-->' /opt/tomcat/conf/server.xml) -ge 1 ]; then
# <Valve className="org.apache.catalina.valves.RemoteIpValve" internalProxies="192\.168\.0\.10|192\.168\.0\.11" remoteIpHeader="x-forwarded-for" proxiesHeader="x-forwarded-by" trustedProxies="proxy1|proxy2" />
# <Valve className="org.apache.catalina.valves.RemoteIpValve" __GROUPER_TOMCAT_REMOTE_IP_INTERNAL_PROXIES__ __GROUPER_TOMCAT_REMOTE_IP_HEADER__ __GROUPER_TOMCAT_REMOTE_IP_PROXIES_HEADER__ __GROUPER_TOMCAT_REMOTE_IP_TRUSTED_PROXIES__ __GROUPER_TOMCAT_REMOTE_IP_PROTOCOL_HEADER__ __GROUPER_TOMCAT_REMOTE_IP_PROTOCOL_HEADER_HTTPS_VALUE__ __GROUPER_TOMCAT_REMOTE_IP_HTTP_SERVER_PORT__ __GROUPER_TOMCAT_REMOTE_IP_HTTPS_SERVER_PORT__ />
sed -i 's|<!--GROUPER_TOMCAT_REMOTE_IP_VALVE-->|<Valve className="org.apache.catalina.valves.RemoteIpValve" __GROUPER_TOMCAT_REMOTE_IP_INTERNAL_PROXIES__ __GROUPER_TOMCAT_REMOTE_IP_HEADER__ __GROUPER_TOMCAT_REMOTE_IP_PROXIES_HEADER__ __GROUPER_TOMCAT_REMOTE_IP_TRUSTED_PROXIES__ __GROUPER_TOMCAT_REMOTE_IP_PROTOCOL_HEADER__ __GROUPER_TOMCAT_REMOTE_IP_PROTOCOL_HEADER_HTTPS_VALUE__ __GROUPER_TOMCAT_REMOTE_IP_HTTP_SERVER_PORT__ __GROUPER_TOMCAT_REMOTE_IP_HTTPS_SERVER_PORT__ />|g' /opt/tomcat/conf/server.xml
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_remoteIpValve) Apply remote IP valve: sed -i 's|<!--GROUPER_TOMCAT_REMOTE_IP_VALVE-->|<Valve className="org.apache.catalina.valves.RemoteIpValve" __GROUPER_TOMCAT_REMOTE_IP_INTERNAL_PROXIES__ __GROUPER_TOMCAT_REMOTE_IP_HEADER__ __GROUPER_TOMCAT_REMOTE_IP_PROXIES_HEADER__ __GROUPER_TOMCAT_REMOTE_IP_TRUSTED_PROXIES__ __GROUPER_TOMCAT_REMOTE_IP_PROTOCOL_HEADER__ __GROUPER_TOMCAT_REMOTE_IP_PROTOCOL_HEADER_HTTPS_VALUE__ __GROUPER_TOMCAT_REMOTE_IP_HTTP_SERVER_PORT__ __GROUPER_TOMCAT_REMOTE_IP_HTTPS_SERVER_PORT__ />|g' /opt/tomcat/conf/server.xml, result: $returnCode"
if [ $returnCode != 0 ]; then exit $returnCode; fi
if [ ! -z "$GROUPER_TOMCAT_REMOTE_IP_INTERNAL_PROXIES" ]; then
sed -i "s|__GROUPER_TOMCAT_REMOTE_IP_INTERNAL_PROXIES__|internalProxies=\"$GROUPER_TOMCAT_REMOTE_IP_INTERNAL_PROXIES\"|g" /opt/tomcat/conf/server.xml
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_remoteIpValve) sed -i \"s|__GROUPER_TOMCAT_REMOTE_IP_INTERNAL_PROXIES__|internalProxies=\\\"$GROUPER_TOMCAT_REMOTE_IP_INTERNAL_PROXIES\\\"|g\" /opt/tomcat/conf/server.xml, result: $returnCode"
if [ $returnCode != 0 ]; then exit $returnCode; fi
else
sed -i 's|__GROUPER_TOMCAT_REMOTE_IP_INTERNAL_PROXIES__||g' /opt/tomcat/conf/server.xml
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_remoteIpValve) sed -i 's|__GROUPER_TOMCAT_REMOTE_IP_INTERNAL_PROXIES__||g' /opt/tomcat/conf/server.xml, result: $returnCode"
if [ $returnCode != 0 ]; then exit $returnCode; fi
fi
if [ ! -z "$GROUPER_TOMCAT_REMOTE_IP_HEADER" ]; then
sed -i "s|__GROUPER_TOMCAT_REMOTE_IP_HEADER__|remoteIpHeader=\"$GROUPER_TOMCAT_REMOTE_IP_HEADER\"|g" /opt/tomcat/conf/server.xml
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_remoteIpValve) sed -i \"s|__GROUPER_TOMCAT_REMOTE_IP_HEADER__|remoteIpHeader=\\\"$GROUPER_TOMCAT_REMOTE_IP_HEADER\\\"|g\" /opt/tomcat/conf/server.xml, result: $returnCode"
if [ $returnCode != 0 ]; then exit $returnCode; fi
else
sed -i 's|__GROUPER_TOMCAT_REMOTE_IP_HEADER__||g' /opt/tomcat/conf/server.xml
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_remoteIpValve) sed -i 's|__GROUPER_TOMCAT_REMOTE_IP_HEADER__||g' /opt/tomcat/conf/server.xml, result: $returnCode"
if [ $returnCode != 0 ]; then exit $returnCode; fi
fi
if [ ! -z "$GROUPER_TOMCAT_REMOTE_IP_PROXIES_HEADER" ]; then
sed -i "s|__GROUPER_TOMCAT_REMOTE_IP_PROXIES_HEADER__|proxiesHeader=\"$GROUPER_TOMCAT_REMOTE_IP_PROXIES_HEADER\"|g" /opt/tomcat/conf/server.xml
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_remoteIpValve) sed -i \"s|__GROUPER_TOMCAT_REMOTE_IP_PROXIES_HEADER__|proxiesHeader=\\\"$GROUPER_TOMCAT_REMOTE_IP_PROXIES_HEADER\\\"|g\" /opt/tomcat/conf/server.xml, result: $returnCode"
if [ $returnCode != 0 ]; then exit $returnCode; fi
else
sed -i 's|__GROUPER_TOMCAT_REMOTE_IP_PROXIES_HEADER__||g' /opt/tomcat/conf/server.xml
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_remoteIpValve) sed -i 's|__GROUPER_TOMCAT_REMOTE_IP_PROXIES_HEADER__||g' /opt/tomcat/conf/server.xml, result: $returnCode"
if [ $returnCode != 0 ]; then exit $returnCode; fi
fi
if [ ! -z "$GROUPER_TOMCAT_REMOTE_IP_TRUSTED_PROXIES" ]; then
sed -i "s|__GROUPER_TOMCAT_REMOTE_IP_TRUSTED_PROXIES__|trustedProxies=\"$GROUPER_TOMCAT_REMOTE_IP_TRUSTED_PROXIES\"|g" /opt/tomcat/conf/server.xml
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_remoteIpValve) sed -i \"s|__GROUPER_TOMCAT_REMOTE_IP_TRUSTED_PROXIES__|trustedProxies=\\\"$GROUPER_TOMCAT_REMOTE_IP_TRUSTED_PROXIES\\\"|g\" /opt/tomcat/conf/server.xml, result: $returnCode"
if [ $returnCode != 0 ]; then exit $returnCode; fi
else
sed -i 's|__GROUPER_TOMCAT_REMOTE_IP_TRUSTED_PROXIES__||g' /opt/tomcat/conf/server.xml
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_remoteIpValve) sed -i 's|__GROUPER_TOMCAT_REMOTE_IP_TRUSTED_PROXIES__||g' /opt/tomcat/conf/server.xml, result: $returnCode"
if [ $returnCode != 0 ]; then exit $returnCode; fi
fi
if [ ! -z "$GROUPER_TOMCAT_REMOTE_IP_PROTOCOL_HEADER" ]; then
sed -i "s|__GROUPER_TOMCAT_REMOTE_IP_PROTOCOL_HEADER__|protocolHeader=\"$GROUPER_TOMCAT_REMOTE_IP_PROTOCOL_HEADER\"|g" /opt/tomcat/conf/server.xml
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_remoteIpValve) sed -i \"s|__GROUPER_TOMCAT_REMOTE_IP_PROTOCOL_HEADER__|protocolHeader=\\\"$GROUPER_TOMCAT_REMOTE_IP_PROTOCOL_HEADER\\\"|g\" /opt/tomcat/conf/server.xml, result: $returnCode"
if [ $returnCode != 0 ]; then exit $returnCode; fi
else
sed -i 's|__GROUPER_TOMCAT_REMOTE_IP_PROTOCOL_HEADER__||g' /opt/tomcat/conf/server.xml
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_remoteIpValve) sed -i 's|__GROUPER_TOMCAT_REMOTE_IP_PROTOCOL_HEADER__||g' /opt/tomcat/conf/server.xml, result: $returnCode"
if [ $returnCode != 0 ]; then exit $returnCode; fi
fi
if [ ! -z "$GROUPER_TOMCAT_REMOTE_IP_PROTOCOL_HEADER_HTTPS_VALUE" ]; then
sed -i "s|__GROUPER_TOMCAT_REMOTE_IP_PROTOCOL_HEADER_HTTPS_VALUE__|protocolHeaderHttpsValue=\"$GROUPER_TOMCAT_REMOTE_IP_PROTOCOL_HEADER_HTTPS_VALUE\"|g" /opt/tomcat/conf/server.xml
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_remoteIpValve) sed -i \"s|__GROUPER_TOMCAT_REMOTE_IP_PROTOCOL_HEADER_HTTPS_VALUE__|protocolHeaderHttpsValue=\\\"$GROUPER_TOMCAT_REMOTE_IP_PROTOCOL_HEADER_HTTPS_VALUE\\\"|g\" /opt/tomcat/conf/server.xml, result: $returnCode"
if [ $returnCode != 0 ]; then exit $returnCode; fi
else
sed -i 's|__GROUPER_TOMCAT_REMOTE_IP_PROTOCOL_HEADER_HTTPS_VALUE__||g' /opt/tomcat/conf/server.xml
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_remoteIpValve) sed -i 's|__GROUPER_TOMCAT_REMOTE_IP_PROTOCOL_HEADER_HTTPS_VALUE__||g' /opt/tomcat/conf/server.xml, result: $returnCode"
if [ $returnCode != 0 ]; then exit $returnCode; fi
fi
if [ ! -z "$GROUPER_TOMCAT_REMOTE_IP_HTTP_SERVER_PORT" ]; then
sed -i "s|__GROUPER_TOMCAT_REMOTE_IP_HTTP_SERVER_PORT__|httpServerPort=\"$GROUPER_TOMCAT_REMOTE_IP_HTTP_SERVER_PORT\"|g" /opt/tomcat/conf/server.xml
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_remoteIpValve) sed -i \"s|__GROUPER_TOMCAT_REMOTE_IP_HTTP_SERVER_PORT__|httpServerPort=\\\"$GROUPER_TOMCAT_REMOTE_IP_HTTP_SERVER_PORT\\\"|g\" /opt/tomcat/conf/server.xml, result: $returnCode"
if [ $returnCode != 0 ]; then exit $returnCode; fi
else
sed -i 's|__GROUPER_TOMCAT_REMOTE_IP_HTTP_SERVER_PORT__||g' /opt/tomcat/conf/server.xml
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_remoteIpValve) sed -i 's|__GROUPER_TOMCAT_REMOTE_IP_HTTP_SERVER_PORT__||g' /opt/tomcat/conf/server.xml, result: $returnCode"
if [ $returnCode != 0 ]; then exit $returnCode; fi
fi
if [ ! -z "$GROUPER_TOMCAT_REMOTE_IP_HTTPS_SERVER_PORT" ]; then
sed -i "s|__GROUPER_TOMCAT_REMOTE_IP_HTTPS_SERVER_PORT__|httpsServerPort=\"$GROUPER_TOMCAT_REMOTE_IP_HTTPS_SERVER_PORT\"|g" /opt/tomcat/conf/server.xml
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_remoteIpValve) sed -i \"s|__GROUPER_TOMCAT_REMOTE_IP_HTTPS_SERVER_PORT__|httpsServerPort=\\\"$GROUPER_TOMCAT_REMOTE_IP_HTTPS_SERVER_PORT\\\"|g\" /opt/tomcat/conf/server.xml, result: $returnCode"
if [ $returnCode != 0 ]; then exit $returnCode; fi
else
sed -i 's|__GROUPER_TOMCAT_REMOTE_IP_HTTPS_SERVER_PORT__||g' /opt/tomcat/conf/server.xml
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_remoteIpValve) sed -i 's|__GROUPER_TOMCAT_REMOTE_IP_HTTPS_SERVER_PORT__||g' /opt/tomcat/conf/server.xml, result: $returnCode"
if [ $returnCode != 0 ]; then exit $returnCode; fi
fi
else
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_remoteIpValve) /opt/tomcat/conf/server.xml does not contain <!--GROUPER_GROUPER_TOMCAT_REMOTE_IP_VALVE--> so will not have remote IP valve applied"
fi
fi
}
setupFilesTomcat_remoteCidrValve() {
if [ ! -z "$GROUPER_TOMCAT_REMOTE_CIDR_VALVE_ALLOW" ]; then
if [ $(grep -c '<!--GROUPER_TOMCAT_REMOTE_CIDR_VALVE-->' /opt/tomcat/conf/server.xml) -ge 1 ]; then
sed -i 's|<!--GROUPER_TOMCAT_REMOTE_CIDR_VALVE-->|<Valve className="org.apache.catalina.valves.RemoteCIDRValve" allow="__GROUPER_TOMCAT_REMOTE_CIDR_VALVE_ALLOW__" usePeerAddress="true" />|g' /opt/tomcat/conf/server.xml
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_remoteCidrValve) Apply remote CIDR valve: sed -i 's|<!--GROUPER_TOMCAT_REMOTE_CIDR_VALVE-->|<Valve className=\"org.apache.catalina.valves.RemoteCIDRValve\" allow=\"__GROUPER_TOMCAT_REMOTE_CIDR_VALVE_ALLOW__\" usePeerAddress=\"true\" />|g' /opt/tomcat/conf/server.xml, result: $returnCode"
if [ $returnCode != 0 ]; then exit $returnCode; fi
sed -i "s|__GROUPER_TOMCAT_REMOTE_CIDR_VALVE_ALLOW__|$GROUPER_TOMCAT_REMOTE_CIDR_VALVE_ALLOW|g" /opt/tomcat/conf/server.xml
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_remoteCidrValve) Apply remote CIDR valve value: sed -i \"s|__GROUPER_TOMCAT_REMOTE_CIDR_VALVE_ALLOW__|$GROUPER_TOMCAT_REMOTE_CIDR_VALVE_ALLOW|g\" /opt/tomcat/conf/server.xml, result: $returnCode"
if [ $returnCode != 0 ]; then exit $returnCode; fi
else
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_remoteCidrValve) /opt/tomcat/conf/server.xml does not contain <!--GROUPER_TOMCAT_REMOTE_CIDR_VALVE--> so will not have remote CIDR valve applied"
fi
fi
}
setupFilesTomcat_serverXml() {
if [ "$GROUPER_ORIGFILE_SERVER_XML" = "true" ]; then
cp /opt/tomcat/conf/server.xml /opt/tomcat/conf/server.xml.currentOriginalInContainer
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_serverXml) cp /opt/tomcat/conf/server.xml /opt/tomcat/conf/server.xml.currentOriginalInContainer , result: $returnCode"
if [ $returnCode != 0 ]; then exit $returnCode; fi
patch /opt/tomcat/conf/server.xml /opt/tomcat/conf/server.xml.grouper.patch
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_serverXml) Patch server.xml to apply grouper settings: patch /opt/tomcat/conf/server.xml /opt/tomcat/conf/server.xml.grouper.patch, result: $returnCode"
if [ $returnCode != 0 ]; then exit $returnCode; fi
else
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_serverXml) /opt/tomcat/conf/server.xml is not the original file so will not be edited"
fi
}
setupFilesTomcat_turnOnAjp() {
if [ "$GROUPER_TOMCAT_AJP_PORT" != "-1" ]; then
if [ $(grep -c '<!--GROUPER_AJP_CONNECTOR-->' /opt/tomcat/conf/server.xml) -ge 1 ]; then
sed -i 's|<!--GROUPER_AJP_CONNECTOR-->|<Connector address="0.0.0.0" secretRequired="false" secure="true" scheme="https" URIEncoding="UTF-8" tomcatAuthentication="false" port="8009" protocol="AJP/1.3" redirectPort="8443" maxParameterCount="10000" />|g' /opt/tomcat/conf/server.xml
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_turnOnAjp) Apply AJP: sed -i 's|<!--GROUPER_AJP_CONNECTOR-->|<Connector address=\"0.0.0.0\" secretRequired=\"false\" secure=\"true\" scheme=\"https\" URIEncoding=\"UTF-8\" tomcatAuthentication=\"false\" port=\"8009\" protocol=\"AJP/1.3\" redirectPort=\"8443\" maxParameterCount=\"10000\" />|g' /opt/tomcat/conf/server.xml, result: $returnCode"
if [ $returnCode != 0 ]; then exit $returnCode; fi
else
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_turnOnAjp) /opt/tomcat/conf/server.xml does not contain <!--GROUPER_AJP_CONNECTOR--> so will not have AJP connector applied"
fi
else
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_turnOnAjp) GROUPER_TOMCAT_AJP_PORT is set to -1, so will not have AJP connector applied"
fi
}
setupFilesTomcat_turnOnHttp() {
if [ "$GROUPER_TOMCAT_HTTP_PORT" != "-1" ]; then
if [ $(grep -c '<!--GROUPER_HTTP_CONNECTOR-->' /opt/tomcat/conf/server.xml) -ge 1 ]; then
sed -i 's|<!--GROUPER_HTTP_CONNECTOR-->|<Connector address="0.0.0.0" secure="true" scheme="https" URIEncoding="UTF-8" tomcatAuthentication="false" port="8080" protocol="HTTP/1.1" redirectPort="8443" maxParameterCount="10000" />|g' /opt/tomcat/conf/server.xml
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_turnOnHttp) Apply HTTP: sed -i 's|<!--GROUPER_HTTP_CONNECTOR-->|<Connector address=\"0.0.0.0\" secure=\"true\" scheme=\"https\" URIEncoding=\"UTF-8\" tomcatAuthentication=\"false\" port=\"8080\" protocol=\"HTTP/1.1\" redirectPort=\"8443\" maxParameterCount=\"10000\" />|g' /opt/tomcat/conf/server.xml, result: $returnCode"
if [ $returnCode != 0 ]; then exit $returnCode; fi
else
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_turnOnHttp) /opt/tomcat/conf/server.xml does not contain <!--GROUPER_HTTP_CONNECTOR--> so will not have HTTP connector applied"
fi
else
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_turnOnHttp) GROUPER_TOMCAT_HTTP_PORT is set to -1, so will not have HTTP connector applied"
fi
}
setupFilesTomcat_turnOnHttps() {
if [ "$GROUPER_TOMCAT_HTTPS_PORT" != "-1" ]; then
if [ $(grep -c '<!--GROUPER_HTTPS_CONNECTOR-->' /opt/tomcat/conf/server.xml) -ge 1 ]; then
sed -i "s|<\!--GROUPER_HTTPS_CONNECTOR-->|<Connector address=\"0.0.0.0\" secure=\"true\" scheme=\"https\" URIEncoding=\"UTF-8\" compression=\"on\" tomcatAuthentication=\"false\" port=\"8443\" protocol=\"org.apache.coyote.http11.Http11NioProtocol\" maxParameterCount=\"10000\" SSLEnabled=\"true\" ><SSLHostConfig protocols=\"TLSv1.2\"><Certificate certificateFile=\"$GROUPER_SSL_CERT_FILE\" certificateKeyFile=\"$GROUPER_SSL_KEY_FILE\" __GROUPER_SSL_CHAIN_FILE__ /></SSLHostConfig></Connector>|g" /opt/tomcat/conf/server.xml
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_turnOnHttps) Apply HTTPS: sed -i \"s|<\\!--GROUPER_HTTPS_CONNECTOR-->|<Connector address=\\\"0.0.0.0\\\" secure=\\\"true\\\" scheme=\\\"https\\\" URIEncoding=\\\"UTF-8\\\" compression=\\\"on\\\" tomcatAuthentication=\\\"false\\\" port=\\\"8443\\\" protocol=\\\"org.apache.coyote.http11.Http11NioProtocol\\\" maxParameterCount=\\\"10000\\\" keyAlias=\\\"$GROUPER_TOMCAT_HTTPS_ALIAS\\\" SSLEnabled=\\\"true\\\" ><SSLHostConfig protocols=\\\"TLSv1.2\\\"><Certificate certificateFile=\\\"$GROUPER_SSL_CERT_FILE\\\" certificateKeyFile=\\\"$GROUPER_SSL_KEY_FILE\\\" __GROUPER_SSL_CHAIN_FILE__ /></SSLHostConfig></Connector>|g\" /opt/tomcat/conf/server.xml, result: $returnCode"
if [ $returnCode != 0 ]; then exit $returnCode; fi
else
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_turnOnHttps) /opt/tomcat/conf/server.xml does not contain <!--GROUPER_HTTPS_CONNECTOR--> so will not have HTTPS connector applied"
fi
if [ "$GROUPER_SSL_USE_CHAIN_FILE" = "true" ]; then
sed -i "s|__GROUPER_SSL_CHAIN_FILE__|certificateChainFile=\"$GROUPER_SSL_CHAIN_FILE\"|g" /opt/tomcat/conf/server.xml
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_turnOnHttps) Setting chain: sed -i \"s|__GROUPER_SSL_CHAIN_FILE__|certificateChainFile=\\\"$GROUPER_SSL_CHAIN_FILE\\\"|g\" /opt/tomcat/conf/server.xml , result: $?"
if [ $returnCode != 0 ]; then exit $returnCode; fi
else
sed -i "s|__GROUPER_SSL_CHAIN_FILE__||g" /opt/tomcat/conf/server.xml
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_turnOnHttps) No chain setting: sed -i \"s|__GROUPER_SSL_CHAIN_FILE__||g\" /opt/tomcat/conf/server.xml , result: $?"
if [ $returnCode != 0 ]; then exit $returnCode; fi
fi
else
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_turnOnHttps) GROUPER_TOMCAT_HTTPS_PORT is set to -1, so will not have AJP connector applied"
fi
}
setupFilesTomcat_accessLogs() {
if [ "$GROUPER_TOMCAT_LOG_ACCESS" = "true" ]; then
if [ $(grep -c '<!--GROUPER_LOGGING_VALVE-->' /opt/tomcat/conf/server.xml) -ge 1 ]; then
sed -i "s|<!--GROUPER_LOGGING_VALVE-->|<Valve className=\"org.apache.catalina.valves.AccessLogValve\" requestAttributesEnabled=\"$GROUPER_TOMCAT_REMOTE_IP_VALVE\" directory=\"$GROUPER_TOMCAT_LOG_ACCESS_DIRECTORY\" prefix=\"tomcat_access_log\" rotatable=\"false\" pattern=\"%h %l %u %t \"%r\" %s %b\" />|g" /opt/tomcat/conf/server.xml
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_accessLogs) Apply access logs: sed -i \"s|<!--GROUPER_LOGGING_VALVE-->|<Valve className=\\\"org.apache.catalina.valves.AccessLogValve\\\" directory=\\\"GROUPER_TOMCAT_LOG_ACCESS_DIRECTORY\\\" prefix=\\\"tomcat_access_log\\\" rotatable=\\\"false\\\" pattern=\\\"%h %l %u %t "%r" %s %b\\\" />|g\" /opt/tomcat/conf/server.xml, result: $returnCode"
if [ $returnCode != 0 ]; then exit $returnCode; fi
else
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_accessLogs) /opt/tomcat/conf/server.xml does not contain <!--GROUPER_LOGGING_VALVE--> so will not have access logs applied"
fi
fi
}
setupFilesTomcat_ports() {
if [ "$GROUPER_TOMCAT_HTTP_PORT" != "8080" ] && [ "$GROUPER_TOMCAT_HTTP_PORT" != "-1" ] ; then
sed -i "s|8080|$GROUPER_TOMCAT_HTTP_PORT|g" /opt/tomcat/conf/server.xml
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_ports) update server.xml to change http port: sed -i \"s|8080|$GROUPER_TOMCAT_HTTP_PORT|g\" /opt/tomcat/conf/server.xml, result: $returnCode"
if [ $returnCode != 0 ]; then exit $returnCode; fi
fi
if [ "$GROUPER_TOMCAT_HTTPS_PORT" != "8443" ]; then
sed -i "s|8443|$GROUPER_TOMCAT_HTTPS_PORT|g" /opt/tomcat/conf/server.xml
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_ports) update server.xml to change https port: sed -i \"s|8443|$GROUPER_TOMCAT_HTTPS_PORT|g\" /opt/tomcat/conf/server.xml, result: $returnCode"
if [ $returnCode != 0 ]; then exit $returnCode; fi
fi
if [ "$GROUPER_TOMCAT_AJP_PORT" != "8009" ]; then
sed -i "s|8009|$GROUPER_TOMCAT_AJP_PORT|g" /opt/tomcat/conf/server.xml
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_ports) update server.xml to change ajp port: sed -i \"s|8009|$GROUPER_TOMCAT_AJP_PORT|g\" /opt/tomcat/conf/server.xml, result: $returnCode"
if [ $returnCode != 0 ]; then exit $returnCode; fi
fi
if [ "$GROUPER_TOMCAT_MAX_HEADER_COUNT" != "-1" ]; then
if [ $(grep -c 'maxHeaderCount' /opt/tomcat/conf/server.xml) -eq 0 ]; then
# add in maxHeaderCount since new chrome sends too many headers
sed -i "s|port=\"$GROUPER_TOMCAT_AJP_PORT\"|port=\"$GROUPER_TOMCAT_AJP_PORT\" maxHeaderCount=\"$GROUPER_TOMCAT_MAX_HEADER_COUNT\" |g" /opt/tomcat/conf/server.xml
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_ports) update server.xml add maxHeaderCount: sed -i \"s|port=\"$GROUPER_TOMCAT_AJP_PORT\"|port=\"$GROUPER_TOMCAT_AJP_PORT\" maxHeaderCount=\"$GROUPER_TOMCAT_MAX_HEADER_COUNT\" |g\" /opt/tomcat/conf/server.xml, result: $returnCode"
if [ $returnCode != 0 ]; then exit $returnCode; fi
fi
fi
if [ "$GROUPER_TOMCAT_SHUTDOWN_PORT" != "8005" ]; then
sed -i "s|8005|$GROUPER_TOMCAT_SHUTDOWN_PORT|g" /opt/tomcat/conf/server.xml
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_ports) update server.xml to change shutdown port: sed -i \"s|8005|$GROUPER_TOMCAT_SHUTDOWN_PORT|g\" /opt/tomcat/conf/server.xml , result: $returnCode"
if [ $returnCode != 0 ]; then exit $returnCode; fi
fi
}
setupFilesTomcat_context() {
if [ -f /opt/tomcat/conf/Catalina/localhost/grouper.xml ]
then
if [ "$GROUPER_ORIGFILE_GROUPER_XML" = "true" ]; then
# ws only doesnt have cookies
sed -i "s|__GROUPER_CONTEXT_COOKIES__|$GROUPER_CONTEXT_COOKIES|g" /opt/tomcat/conf/Catalina/localhost/grouper.xml
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_context) Replace context cookies in grouper.xml: sed -i \"s|__GROUPER_CONTEXT_COOKIES__|$GROUPER_CONTEXT_COOKIES|g\" /opt/tomcat/conf/Catalina/localhost/grouper.xml , result: $returnCode"
if [ $returnCode != 0 ]; then exit $returnCode; fi
# setup context
sed -i "s|__GROUPER_TOMCAT_CONTEXT__|$GROUPER_TOMCAT_CONTEXT|g" /opt/tomcat/conf/Catalina/localhost/grouper.xml
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_context) Replace tomcat context in grouper.xml: sed -i \"s|__GROUPER_TOMCAT_CONTEXT__|$GROUPER_TOMCAT_CONTEXT|g\" /opt/tomcat/conf/Catalina/localhost/grouper.xml, result: $returnCode"
if [ $returnCode != 0 ]; then exit $returnCode; fi
# rename file if needed since that can matter with tomcat
if [ "$GROUPER_TOMCAT_CONTEXT" != "grouper" ]
then
mv -v /opt/tomcat/conf/Catalina/localhost/grouper.xml "/opt/tomcat/conf/Catalina/localhost/$GROUPER_TOMCAT_CONTEXT.xml"
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_context) mv -v /opt/tomcat/conf/Catalina/localhost/grouper.xml \"/opt/tomcat/conf/Catalina/localhost/$GROUPER_TOMCAT_CONTEXT.xml\" , result: $returnCode"
if [ $returnCode != 0 ]; then exit $returnCode; fi
fi
else
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_context) /opt/tomcat/conf/Catalina/localhost/grouper.xml is not the original file so will not be edited"
fi
fi
}
setupFilesTomcat_authn() {
if [ "$GROUPER_WS_TOMCAT_AUTHN" = "true" ]
then
if [ "$GROUPER_ORIGFILE_WEBAPP_WEB_XML" = "true" ]; then
cp /opt/tier-support/web.wsTomcatAuthn.xml /opt/grouper/grouperWebapp/WEB-INF/web.xml
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_authn) cp /opt/tier-support/web.wsTomcatAuthn.xml /opt/grouper/grouperWebapp/WEB-INF/web.xml , result: $returnCode"
if [ $returnCode != 0 ]; then exit $returnCode; fi
else
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_authn) /opt/grouper/grouperWebapp/WEB-INF/web.xml is not the original file so will not be edited"
fi
sed -i 's|tomcatAuthentication="false"|tomcatAuthentication="true"|g' /opt/tomcat/conf/server.xml
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_authn) sed -i 's|tomcatAuthentication=\"false\"|tomcatAuthentication=\"true\"|g' /opt/tomcat/conf/server.xml, result: $returnCode"
if [ $returnCode != 0 ]; then exit $returnCode; fi
fi
}
setupFilesTomcat_sessionTimeout() {
if [ "$GROUPER_RUN_TOMCAT" = "true" ] && [ "$GROUPER_TOMCAT_SESSION_TIMEOUT_MINUTES" != "-2" ]
then
sed -i "s|<session-timeout>30</session-timeout>|<session-timeout>$GROUPER_TOMCAT_SESSION_TIMEOUT_MINUTES</session-timeout>|g" /opt/tomcat/conf/web.xml
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_sessionTimeout) based on GROUPER_TOMCAT_SESSION_TIMEOUT_MINUTES, sed -i \"s|<session-timeout>30</session-timeout>|<session-timeout>$GROUPER_TOMCAT_SESSION_TIMEOUT_MINUTES</session-timeout>|g\" /opt/tomcat/conf/web.xml , result=$returnCode"
if [ $returnCode != 0 ]; then exit $returnCode; fi
fi
}
setupFilesTomcat_ssl() {
if [ "$GROUPER_WEBCLIENT_IS_SSL" = "false" ]
then
sed -i 's|secure="true"||g' /opt/tomcat/conf/server.xml
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_ssl) based on GROUPER_WEBCLIENT_IS_SSL, sed -i 's|secure=\"true\"||g' /opt/tomcat/conf/server.xml , result=$returnCode"
if [ $returnCode != 0 ] && [ "$GROUPER_ORIGFILE_SERVER_XML" = "true" ]
then
exit $returnCode
fi
sed -i 's|scheme="https"|scheme="http"|g' /opt/tomcat/conf/server.xml
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_ssl) based on GROUPER_WEBCLIENT_IS_SSL, sed -i 's|scheme=\"https\"|scheme=\"http\"|g' /opt/tomcat/conf/server.xml , result=$returnCode"
if [ $returnCode != 0 ] && [ "$GROUPER_ORIGFILE_SERVER_XML" = "true" ]
then
exit $returnCode
fi
fi
}
setupFilesTomcat_sslCertsAnchors() {
# the container user (we arent sure who this is) should be able to update root certs
# echo 'ALL ALL=NOPASSWD: /bin/update-ca-trust' | sudo EDITOR='tee -n' visudo
# generate anchor:
# openssl genrsa -out rootCAKey.pem 2048
# openssl req -x509 -sha256 -new -nodes -key rootCAKey.pem -days 3650 -out rootCACert.pem
if [ -n "$(ls -A /opt/grouper/certs/anchors/ 2>/dev/null)" ]; then
if [ $EUID -eq 0 ] || [ "$GROUPER_TOMCAT_UID" = "$EUID" ]; then
# if root
if [[ $EUID -eq 0 ]]; then
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_sslCertsAnchors) There are anchor certs in /opt/grouper/certs/anchors/ to process"
/usr/bin/cp -v /opt/grouper/certs/anchors/* /etc/pki/ca-trust/source/anchors
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_sslCertsAnchors) /usr/bin/cp -v /opt/grouper/certs/anchors/* /etc/pki/ca-trust/source/anchors , result=$returnCode"
if [ $returnCode != 0 ]
then
exit $returnCode
fi
/bin/update-ca-trust
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_sslCertsAnchors) /bin/update-ca-trust , result=$returnCode"
if [ $returnCode != 0 ]
then
exit $returnCode
fi
else
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_sslCertsAnchors) There are anchor certs in /opt/grouper/certs/anchors/ to process but not running as root so you might need to run this in derived image: /usr/bin/cp -v /opt/grouper/certs/anchors/* /etc/pki/ca-trust/source/anchors; /bin/update-ca-trust"
fi
chmod u+w $JAVA_HOME/lib/security/cacerts
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_sslCertsAnchors) chmod u+w $JAVA_HOME/lib/security/cacerts , result=$returnCode"
if [ $returnCode != 0 ]
then
exit $returnCode
fi
for fileName in /opt/grouper/certs/anchors/*.pem; do
[ -f "$fileName" ] || continue
fileNameNoExtension=$(basename -- "$fileName")
fileNameNoExtension="${fileNameNoExtension%.*}"
/usr/lib/jvm/java/bin/keytool -import -trustcacerts -noprompt -cacerts -storepass changeit -alias "$fileNameNoExtension" -file "$fileName"
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_sslCertsAnchors) /usr/lib/jvm/java/bin/keytool -import -trustcacerts -noprompt -cacerts -storepass changeit -alias \"$fileNameNoExtension\" -file \"$fileName\" , result=$returnCode"
if [ $returnCode != 0 ]
then
exit $returnCode
fi
done
chmod u-w $JAVA_HOME/lib/security/cacerts
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_sslCertsAnchors) chmod u-w $JAVA_HOME/lib/security/cacerts , result=$returnCode"
if [ $returnCode != 0 ]
then
exit $returnCode
fi
else
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_sslCertsAnchors) Not running as root or tomcat user so not processing /opt/grouper/certs/anchors/"
fi
else
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_sslCertsAnchors) There are no anchor certs in /opt/grouper/certs/anchors/ to process"
fi
}
setupFilesTomcat_sslCertsClient() {
if [ -n "$(ls -A /opt/grouper/certs/client/*.pem 2>/dev/null)" ]; then
if [ $EUID -eq 0 ] || [ "$GROUPER_TOMCAT_UID" = "$EUID" ]; then
chmod u+w $JAVA_HOME/lib/security/cacerts
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_sslCertsClient) chmod u+w $JAVA_HOME/lib/security/cacerts , result=$returnCode"
if [ $returnCode != 0 ]
then
exit $returnCode
fi
for fileName in /opt/grouper/certs/client/*.pem; do
[ -f "$fileName" ] || continue
fileNameNoExtension=$(basename -- "$fileName")
fileNameNoExtension="${fileNameNoExtension%.*}"
/usr/lib/jvm/java/bin/keytool -import -noprompt -cacerts -storepass changeit -alias "$fileNameNoExtension" -file "$fileName"
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_sslCertsClient) /usr/lib/jvm/java/bin/keytool -import -noprompt -cacerts -storepass changeit -alias \"$fileNameNoExtension\" -file \"$fileName\" , result=$returnCode"
if [ $returnCode != 0 ]
then
exit $returnCode
fi
done
chmod u-w $JAVA_HOME/lib/security/cacerts
returnCode=$?
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_sslCertsClient) chmod u-w $JAVA_HOME/lib/security/cacerts , result=$returnCode"
if [ $returnCode != 0 ]
then
exit $returnCode
fi
else
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_sslCertsAnchors) Not running as root or tomcat user so not processing /opt/grouper/certs/client/"
fi
else
echo "grouperContainer; INFO: (librarySetupFilesTomcat.sh-setupFilesTomcat_sslCertsClient) There are no client certs in /opt/grouper/certs/client/*.pem to process"
fi
}
setupFilesTomcat_unsetAll() {
unset -f setupFilesTomcat
unset -f setupFilesTomcat_authn
unset -f setupFilesTomcat_authnValve
unset -f setupFilesTomcat_context
unset -f setupFilesTomcat_ports
unset -f setupFilesTomcat_remoteCidrValve
unset -f setupFilesTomcat_remoteIpValve
unset -f setupFilesTomcat_rewriteValve
unset -f setupFilesTomcat_serverXml
unset -f setupFilesTomcat_ssl
unset -f setupFilesTomcat_sslCertsAnchors
unset -f setupFilesTomcat_sslCertsClient
unset -f setupFilesTomcat_unsetAll
unset -f setupFilesTomcat_accessLogs
unset -f setupFilesTomcat_sessionTimeout
unset -f setupFilesTomcat_turnOnAjp
unset -f setupFilesTomcat_turnOnHttp
unset -f setupFilesTomcat_turnOnHttps
}
setupFilesTomcat_exportAll() {
export -f setupFilesTomcat
export -f setupFilesTomcat_authn
export -f setupFilesTomcat_authnValve
export -f setupFilesTomcat_context
export -f setupFilesTomcat_ports
export -f setupFilesTomcat_remoteCidrValve
export -f setupFilesTomcat_remoteIpValve
export -f setupFilesTomcat_rewriteValve
export -f setupFilesTomcat_serverXml
export -f setupFilesTomcat_ssl
export -f setupFilesTomcat_sslCertsAnchors
export -f setupFilesTomcat_sslCertsClient
export -f setupFilesTomcat_unsetAll
export -f setupFilesTomcat_accessLogs
export -f setupFilesTomcat_sessionTimeout
export -f setupFilesTomcat_turnOnAjp
export -f setupFilesTomcat_turnOnHttp
export -f setupFilesTomcat_turnOnHttps
}
# export everything
setupFilesTomcat_exportAll