diff --git a/Workbench/webproxy/Dockerfile b/Workbench/webproxy/Dockerfile index da544b8..3140f16 100644 --- a/Workbench/webproxy/Dockerfile +++ b/Workbench/webproxy/Dockerfile @@ -7,6 +7,7 @@ COPY container_files/httpd/proxy.conf /etc/httpd/conf.d/ COPY container_files/httpd/shib.conf /etc/httpd/conf.d/ COPY container_files/httpd/index.html /var/www/html/ COPY container_files/httpd/csp_logo.jpg /var/www/html/ +COPY container_files/httpd/server-chain.crt /etc/pki/tls/certs/server-chain.crt COPY container_files/httpd/localhost.crt /etc/pki/tls/certs/localhost.crt COPY container_files/httpd/localhost.key /etc/pki/tls/private/localhost.key RUN chmod 600 /etc/pki/tls/certs/localhost.crt && chmod 600 /etc/pki/tls/private/localhost.key diff --git a/Workbench/webproxy/container_files/httpd/server-chain.crt b/Workbench/webproxy/container_files/httpd/server-chain.crt new file mode 100644 index 0000000..881c325 --- /dev/null +++ b/Workbench/webproxy/container_files/httpd/server-chain.crt @@ -0,0 +1,23 @@ +-----BEGIN CERTIFICATE----- +MIID6jCCAtKgAwIBAgICaaIwDQYJKoZIhvcNAQELBQAwgakxCzAJBgNVBAYTAi0t +MRIwEAYDVQQIDAlTb21lU3RhdGUxETAPBgNVBAcMCFNvbWVDaXR5MRkwFwYDVQQK +DBBTb21lT3JnYW5pemF0aW9uMR8wHQYDVQQLDBZTb21lT3JnYW5pemF0aW9uYWxV +bml0MRUwEwYDVQQDDAxiYWFhMWFiNTE0NGExIDAeBgkqhkiG9w0BCQEWEXJvb3RA +YmFhYTFhYjUxNDRhMB4XDTIwMDQyMTE4NTkwN1oXDTIxMDQyMTE4NTkwN1owgakx +CzAJBgNVBAYTAi0tMRIwEAYDVQQIDAlTb21lU3RhdGUxETAPBgNVBAcMCFNvbWVD +aXR5MRkwFwYDVQQKDBBTb21lT3JnYW5pemF0aW9uMR8wHQYDVQQLDBZTb21lT3Jn +YW5pemF0aW9uYWxVbml0MRUwEwYDVQQDDAxiYWFhMWFiNTE0NGExIDAeBgkqhkiG +9w0BCQEWEXJvb3RAYmFhYTFhYjUxNDRhMIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8A +MIIBCgKCAQEArzuaMkF/83JBHj8mQMm5jhKLSSC+viuisAxNHGHM6j33lJl9ls4R +iUBnbW4sTW4l1uYMfKZJKr5y9msTQXu8+CCON7oscUvFuc/D8gRb/J9QmJK188Cr +L6DS+ofZXZqqV4Ou5FKjOax7gOvAMAGV7x4F9qEfdy8SyjSjhK5+57BaboH/PgLY +qu0i7SJ+NzkGq7M0lt/DdqGZazOQbBhaoryB/hvo7JgSbxAfhVqQdtkcidSsNbBA +/+PLlk1+hhOhiA15h/laA854T6FNYyeurEyr530zUo7P4/PZZyu/7y4D+s8KlNt3 +zpfVy9hNXgxFRCpLBC4XWLVwYmT18DfHIQIDAQABoxowGDAJBgNVHRMEAjAAMAsG +A1UdDwQEAwIF4DANBgkqhkiG9w0BAQsFAAOCAQEAJcmopkftBDCpVW8GmtlD23o6 +oBOAnD566BK5zA23R9QDyoTX2Roz6moXxMrY3tlgL4LO/2prrR70vBIG6zn5q/xG +goAwnWcQmFSg3HhiVJlcjRNrBEIbYw2edeZC38r6sWVj50RFCtlCMIaDdRAZCiVy +Avf+S2Dw1QD9urkdjTMQaogMNmjZiXxKB2Zteqnks3JEVpOdlnLZYObIvSa1leIP +gw4HgTllV1IqOJtgciczBX3xr8l6WR730BOv39ciGk25R4DQZxR/dR61NpnaYYuz +8Rb+n48KaBe3vcxDtgAP8skFf1FN72bMOxrSYy6TEcN4URUMK4ybcXvLVKWEjg== +-----END CERTIFICATE----- diff --git a/Workbench/webproxy/container_files/httpd/ssl.conf b/Workbench/webproxy/container_files/httpd/ssl.conf new file mode 100644 index 0000000..a44d33d --- /dev/null +++ b/Workbench/webproxy/container_files/httpd/ssl.conf @@ -0,0 +1,321 @@ +# +# When we also provide SSL we have to listen to the +# the HTTPS port in addition. +# +Listen 443 https + +## +## SSL Global Context +## +## All SSL configuration in this context applies both to +## the main server and all SSL-enabled virtual hosts. +## + +# Pass Phrase Dialog: +# Configure the pass phrase gathering process. +# The filtering dialog program (`builtin' is a internal +# terminal dialog) has to provide the pass phrase on stdout. +SSLPassPhraseDialog exec:/usr/libexec/httpd-ssl-pass-dialog + +# Inter-Process Session Cache: +# Configure the SSL Session Cache: First the mechanism +# to use and second the expiring timeout (in seconds). +SSLSessionCache shmcb:/run/httpd/sslcache(512000) +SSLSessionCacheTimeout 300 + +# Pseudo Random Number Generator (PRNG): +# Configure one or more sources to seed the PRNG of the +# SSL library. The seed data should be of good random quality. +# WARNING! On some platforms /dev/random blocks if not enough entropy +# is available. This means you then cannot use the /dev/random device +# because it would lead to very long connection times (as long as +# it requires to make more entropy available). But usually those +# platforms additionally provide a /dev/urandom device which doesn't +# block. So, if available, use this one instead. Read the mod_ssl User +# Manual for more details. +SSLRandomSeed startup file:/dev/urandom 256 +SSLRandomSeed connect builtin +#SSLRandomSeed startup file:/dev/random 512 +#SSLRandomSeed connect file:/dev/random 512 +#SSLRandomSeed connect file:/dev/urandom 512 + +# +# Use "SSLCryptoDevice" to enable any supported hardware +# accelerators. Use "openssl engine -v" to list supported +# engine names. NOTE: If you enable an accelerator and the +# server does not start, consult the error logs and ensure +# your accelerator is functioning properly. +# +SSLCryptoDevice builtin +#SSLCryptoDevice ubsec +/Certificate + +# SSL Protocol support: +# List the enable protocol levels with which clients will be able to +# connect. Disable SSLv2 access by default: +SSLProtocol all -SSLv2 -SSLv3 + +# SSL Cipher Suite: +# List the ciphers that the client is permitted to negotiate. +# See the mod_ssl documentation for a complete list. +SSLCipherSuite HIGH:3DES:!aNULL:!MD5:!SEED:!IDEA + +# Speed-optimized SSL Cipher configuration: +# If speed is your main concern (on busy HTTPS servers e.g.), +# you might want to force clients to specific, performance +# optimized ciphers. In this case, prepend those ciphers +# to the SSLCipherSuite list, and enable SSLHonorCipherOrder. +# Caveat: by giving precedence to RC4-SHA and AES128-SHA +# (as in the example below), most connections will no longer +# have perfect forward secrecy - if the server's key is +# compromised, captures of past or future traffic must be +# considered compromised, too. +#SSLCipherSuite RC4-SHA:AES128-SHA:HIGH:MEDIUM:!aNULL:!MD5 +#SSLHonorCipherOrder on + +# Server Certificate: +# Point SSLCertificateFile at a PEM encoded certificate. If +# the certificate is encrypted, then you will be prompted for a +# pass phrase. Note that a kill -HUP will prompt again. A new +# certificate can be generated using the genkey(1) command. +SSLCertificateFile /etc/pki/tls/certs/localhost.crt + +# Server Private Key: +# If the key is not combined with the certificate, use this +# directive to point at the key file. Keep in mind that if +# you've both a RSA and a DSA private key you can configure +# both in parallel (to also allow the use of DSA ciphers, etc.) +SSLCertificateKeyFile /etc/pki/tls/private/localhost.key + +# Server Certificate Chain: +# Point SSLCertificateChainFile at a file containing the +# concatenation of PEM encoded CA certificates which form the +# certificate chain for the server certificate. Alternatively +# the referenced file can be the same as SSLCertificateFile +# when the CA certificates are directly appended to the server +# certificate for convinience. +SSLCertificateChainFile /etc/pki/tls/certs/server-chain.crt + +# Certificate Authority (CA): +# Set the CA certificate verification path where to find CA +# certificates for client authentication or alternatively one +# huge file containing all of them (file must be PEM encoded) +"ssl.conf" 217L, 9400C written +[root@ip-172-31-23-170 Workbench]# mv ssl.conf webproxy/container_files/httpd/ +[root@ip-172-31-23-170 Workbench]# cat webproxy/container_files/httpd/ssl.conf +# +# When we also provide SSL we have to listen to the +# the HTTPS port in addition. +# +Listen 443 https + +## +## SSL Global Context +## +## All SSL configuration in this context applies both to +## the main server and all SSL-enabled virtual hosts. +## + +# Pass Phrase Dialog: +# Configure the pass phrase gathering process. +# The filtering dialog program (`builtin' is a internal +# terminal dialog) has to provide the pass phrase on stdout. +SSLPassPhraseDialog exec:/usr/libexec/httpd-ssl-pass-dialog + +# Inter-Process Session Cache: +# Configure the SSL Session Cache: First the mechanism +# to use and second the expiring timeout (in seconds). +SSLSessionCache shmcb:/run/httpd/sslcache(512000) +SSLSessionCacheTimeout 300 + +# Pseudo Random Number Generator (PRNG): +# Configure one or more sources to seed the PRNG of the +# SSL library. The seed data should be of good random quality. +# WARNING! On some platforms /dev/random blocks if not enough entropy +# is available. This means you then cannot use the /dev/random device +# because it would lead to very long connection times (as long as +# it requires to make more entropy available). But usually those +# platforms additionally provide a /dev/urandom device which doesn't +# block. So, if available, use this one instead. Read the mod_ssl User +# Manual for more details. +SSLRandomSeed startup file:/dev/urandom 256 +SSLRandomSeed connect builtin +#SSLRandomSeed startup file:/dev/random 512 +#SSLRandomSeed connect file:/dev/random 512 +#SSLRandomSeed connect file:/dev/urandom 512 + +# +# Use "SSLCryptoDevice" to enable any supported hardware +# accelerators. Use "openssl engine -v" to list supported +# engine names. NOTE: If you enable an accelerator and the +# server does not start, consult the error logs and ensure +# your accelerator is functioning properly. +# +SSLCryptoDevice builtin +#SSLCryptoDevice ubsec + +## +## SSL Virtual Host Context +## + + + +# General setup for the virtual host, inherited from global configuration +#DocumentRoot "/var/www/html" +#ServerName www.example.com:443 + +# Use separate log files for the SSL virtual host; note that LogLevel +# is not inherited from httpd.conf. +ErrorLog /tmp/logpipe +TransferLog /tmp/logpipe +LogLevel warn + +# SSL Engine Switch: +# Enable/Disable SSL for this virtual host. +SSLEngine on + +# SSL Protocol support: +# List the enable protocol levels with which clients will be able to +# connect. Disable SSLv2 access by default: +SSLProtocol all -SSLv2 -SSLv3 + +# SSL Cipher Suite: +# List the ciphers that the client is permitted to negotiate. +# See the mod_ssl documentation for a complete list. +SSLCipherSuite HIGH:3DES:!aNULL:!MD5:!SEED:!IDEA + +# Speed-optimized SSL Cipher configuration: +# If speed is your main concern (on busy HTTPS servers e.g.), +# you might want to force clients to specific, performance +# optimized ciphers. In this case, prepend those ciphers +# to the SSLCipherSuite list, and enable SSLHonorCipherOrder. +# Caveat: by giving precedence to RC4-SHA and AES128-SHA +# (as in the example below), most connections will no longer +# have perfect forward secrecy - if the server's key is +# compromised, captures of past or future traffic must be +# considered compromised, too. +#SSLCipherSuite RC4-SHA:AES128-SHA:HIGH:MEDIUM:!aNULL:!MD5 +#SSLHonorCipherOrder on + +# Server Certificate: +# Point SSLCertificateFile at a PEM encoded certificate. If +# the certificate is encrypted, then you will be prompted for a +# pass phrase. Note that a kill -HUP will prompt again. A new +# certificate can be generated using the genkey(1) command. +SSLCertificateFile /etc/pki/tls/certs/localhost.crt + +# Server Private Key: +# If the key is not combined with the certificate, use this +# directive to point at the key file. Keep in mind that if +# you've both a RSA and a DSA private key you can configure +# both in parallel (to also allow the use of DSA ciphers, etc.) +SSLCertificateKeyFile /etc/pki/tls/private/localhost.key + +# Server Certificate Chain: +# Point SSLCertificateChainFile at a file containing the +# concatenation of PEM encoded CA certificates which form the +# certificate chain for the server certificate. Alternatively +# the referenced file can be the same as SSLCertificateFile +# when the CA certificates are directly appended to the server +# certificate for convinience. +SSLCertificateChainFile /etc/pki/tls/certs/server-chain.crt + +# Certificate Authority (CA): +# Set the CA certificate verification path where to find CA +# certificates for client authentication or alternatively one +# huge file containing all of them (file must be PEM encoded) +#SSLCACertificateFile /etc/pki/tls/certs/ca-bundle.crt + +# Client Authentication (Type): +# Client certificate verification type and depth. Types are +# none, optional, require and optional_no_ca. Depth is a +# number which specifies how deeply to verify the certificate +# issuer chain before deciding the certificate is not valid. +#SSLVerifyClient require +#SSLVerifyDepth 10 + +# Access Control: +# With SSLRequire you can do per-directory access control based +# on arbitrary complex boolean expressions containing server +# variable checks and other lookup directives. The syntax is a +# mixture between C and Perl. See the mod_ssl documentation +# for more details. +# +#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \ +# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \ +# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \ +# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \ +# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \ +# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/ +# + +# SSL Engine Options: +# Set various options for the SSL engine. +# o FakeBasicAuth: +# Translate the client X.509 into a Basic Authorisation. This means that +# the standard Auth/DBMAuth methods can be used for access control. The +# user name is the `one line' version of the client's X.509 certificate. +# Note that no password is obtained from the user. Every entry in the user +# file needs this password: `xxj31ZMTZzkVA'. +# o ExportCertData: +# This exports two additional environment variables: SSL_CLIENT_CERT and +# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the +# server (always existing) and the client (only existing when client +# authentication is used). This can be used to import the certificates +# into CGI scripts. +# o StdEnvVars: +# This exports the standard SSL/TLS related `SSL_*' environment variables. +# Per default this exportation is switched off for performance reasons, +# because the extraction step is an expensive operation and is usually +# useless for serving static content. So one usually enables the +# exportation for CGI and SSI requests only. +# o StrictRequire: +# This denies access when "SSLRequireSSL" or "SSLRequire" applied even +# under a "Satisfy any" situation, i.e. when it applies access is denied +# and no other module can change it. +# o OptRenegotiate: +# This enables optimized SSL connection renegotiation handling when SSL +# directives are used in per-directory context. +#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire + + SSLOptions +StdEnvVars + + + SSLOptions +StdEnvVars + + +# SSL Protocol Adjustments: +# The safe and default but still SSL/TLS standard compliant shutdown +# approach is that mod_ssl sends the close notify alert but doesn't wait for +# the close notify alert from client. When you need a different shutdown +# approach you can use one of the following variables: +# o ssl-unclean-shutdown: +# This forces an unclean shutdown when the connection is closed, i.e. no +# SSL close notify alert is send or allowed to received. This violates +# the SSL/TLS standard but is needed for some brain-dead browsers. Use +# this when you receive I/O errors because of the standard approach where +# mod_ssl sends the close notify alert. +# o ssl-accurate-shutdown: +# This forces an accurate shutdown when the connection is closed, i.e. a +# SSL close notify alert is send and mod_ssl waits for the close notify +# alert of the client. This is 100% SSL/TLS standard compliant, but in +# practice often causes hanging connections with brain-dead browsers. Use +# this only for browsers where you know that their SSL implementation +# works correctly. +# Notice: Most problems of broken clients are also related to the HTTP +# keep-alive facility, so you usually additionally want to disable +# keep-alive for those clients, too. Use variable "nokeepalive" for this. +# Similarly, one has to force some clients to use HTTP/1.0 to workaround +# their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and +# "force-response-1.0" for this. +BrowserMatch "MSIE [2-5]" \ + nokeepalive ssl-unclean-shutdown \ + downgrade-1.0 force-response-1.0 + +# Per-Server Logging: +# The home of a custom SSL log file. Use this when you want a +# compact non-error SSL logfile on a virtual host basis. +CustomLog logs/ssl_request_log \ + "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b" + +