fix typo

Workbench/webproxy/container_files/httpd/ssl.conf

@@ -1,109 +1,4 @@
 #
-# When we also provide SSL we have to listen to the
-# the HTTPS port in addition.
-#
-Listen 443 https
-
-##
-##  SSL Global Context
-##
-##  All SSL configuration in this context applies both to
-##  the main server and all SSL-enabled virtual hosts.
-##
-
-#   Pass Phrase Dialog:
-#   Configure the pass phrase gathering process.
-#   The filtering dialog program (`builtin' is a internal
-#   terminal dialog) has to provide the pass phrase on stdout.
-SSLPassPhraseDialog exec:/usr/libexec/httpd-ssl-pass-dialog
-
-#   Inter-Process Session Cache:
-#   Configure the SSL Session Cache: First the mechanism
-#   to use and second the expiring timeout (in seconds).
-SSLSessionCache         shmcb:/run/httpd/sslcache(512000)
-SSLSessionCacheTimeout  300
-
-#   Pseudo Random Number Generator (PRNG):
-#   Configure one or more sources to seed the PRNG of the
-#   SSL library. The seed data should be of good random quality.
-#   WARNING! On some platforms /dev/random blocks if not enough entropy
-#   is available. This means you then cannot use the /dev/random device
-#   because it would lead to very long connection times (as long as
-#   it requires to make more entropy available). But usually those
-#   platforms additionally provide a /dev/urandom device which doesn't
-#   block. So, if available, use this one instead. Read the mod_ssl User
-#   Manual for more details.
-SSLRandomSeed startup file:/dev/urandom  256
-SSLRandomSeed connect builtin
-#SSLRandomSeed startup file:/dev/random  512
-#SSLRandomSeed connect file:/dev/random  512
-#SSLRandomSeed connect file:/dev/urandom 512
-
-#
-# Use "SSLCryptoDevice" to enable any supported hardware
-# accelerators. Use "openssl engine -v" to list supported
-# engine names.  NOTE: If you enable an accelerator and the
-# server does not start, consult the error logs and ensure
-# your accelerator is functioning properly.
-#
-SSLCryptoDevice builtin
-#SSLCryptoDevice ubsec
-/Certificate
-
-#   SSL Protocol support:
-# List the enable protocol levels with which clients will be able to
-# connect.  Disable SSLv2 access by default:
-SSLProtocol all -SSLv2 -SSLv3
-
-#   SSL Cipher Suite:
-#   List the ciphers that the client is permitted to negotiate.
-#   See the mod_ssl documentation for a complete list.
-SSLCipherSuite HIGH:3DES:!aNULL:!MD5:!SEED:!IDEA
-
-#   Speed-optimized SSL Cipher configuration:
-#   If speed is your main concern (on busy HTTPS servers e.g.),
-#   you might want to force clients to specific, performance
-#   optimized ciphers. In this case, prepend those ciphers
-#   to the SSLCipherSuite list, and enable SSLHonorCipherOrder.
-#   Caveat: by giving precedence to RC4-SHA and AES128-SHA
-#   (as in the example below), most connections will no longer
-#   have perfect forward secrecy - if the server's key is
-#   compromised, captures of past or future traffic must be
-#   considered compromised, too.
-#SSLCipherSuite RC4-SHA:AES128-SHA:HIGH:MEDIUM:!aNULL:!MD5
-#SSLHonorCipherOrder on
-
-#   Server Certificate:
-# Point SSLCertificateFile at a PEM encoded certificate.  If
-# the certificate is encrypted, then you will be prompted for a
-# pass phrase.  Note that a kill -HUP will prompt again.  A new
-# certificate can be generated using the genkey(1) command.
-SSLCertificateFile /etc/pki/tls/certs/localhost.crt
-
-#   Server Private Key:
-#   If the key is not combined with the certificate, use this
-#   directive to point at the key file.  Keep in mind that if
-#   you've both a RSA and a DSA private key you can configure
-#   both in parallel (to also allow the use of DSA ciphers, etc.)
-SSLCertificateKeyFile /etc/pki/tls/private/localhost.key
-
-#   Server Certificate Chain:
-#   Point SSLCertificateChainFile at a file containing the
-#   concatenation of PEM encoded CA certificates which form the
-#   certificate chain for the server certificate. Alternatively
-#   the referenced file can be the same as SSLCertificateFile
-#   when the CA certificates are directly appended to the server
-#   certificate for convinience.
-SSLCertificateChainFile /etc/pki/tls/certs/server-chain.crt
-
-#   Certificate Authority (CA):
-#   Set the CA certificate verification path where to find CA
-#   certificates for client authentication or alternatively one
-#   huge file containing all of them (file must be PEM encoded)
-"ssl.conf" 217L, 9400C written
-[root@ip-172-31-23-170 Workbench]# mv ssl.conf webproxy/container_files/httpd/
-[root@ip-172-31-23-170 Workbench]# cat webproxy/container_files/httpd/ssl.conf 
-#
 # When we also provide SSL we have to listen to the 
 # the HTTPS port in addition.
 #